Den Kunststoff Polyethylenterephthalat kennen Sie im Alltag von PET-Kunststoffflaschen, oder er ist Ihnen bereits als Polyester in Textilien begegnet. Neben diesen bekannten Anwendungsbereichen wird PET jedoch auch gerne für Gleitteile wie Lagerbuchsen und Gleitschienen, für Bauteile in lebensmitteltechnischen Anlagen oder für elektrische Isolierkomponenten verwendet. Es wird sogar zur Herstellung von Kino-Filmmaterial eingesetzt. Mit seiner hohen Verschleiß- und Bruchfestigkeit eignet sich PET hervorragend für die Produktion von beständigen Profilen mit hoher Dimensionsstabilität

It is a material with a high resistance to chemicals. Its specific weight is low. It is a slippery material with a low coefficient of friction. The water and moisture absorption property is close to zero. It can be used as cutting plate especially in industrial kitchens and butcher cutting log. It has the ability to be welded. The element that characterizes polyethylene is the molecular weight. Low molecular weight can be grouped into three groups: low molecular weight (PE 300), high molecular weight (PE 500) and ultra high molecular weight (PE 1000).

In various categories based on polyethylene density and chemical properties classified. Mechanical properties, molecular weight, crystal structure and branching It depends on the type. . HDPE (High Density PE) . LDPE (Low Density PE) Film extrusion (production of film for general purpose and display packaging) Film extrusion (heavy-duty bag, film for construction and industrial applications), wire and cable coating (Teflon, power, high signal and frequency cables), blow-up coating (detergent bottle, container for large volume and corrosive chemicals). Pipe extrusion (various pipes

Grundsätzlich arbeitet AGK mit hochtemperaturbeständigen Werkstoffen. Im Kunststoffbereich sind dies duroplastische Werkstoffe, die bis zu einer Grenztemperatur von ca. 300°C einsetzbar sind und dabei gleichzeitig formstabil bleiben. Dies ist bei Thermoplasten grundsätzlich nicht so, da sie sich unter Druck verformen. Sie zeigen ein konstruktiv unerwünschtes Fließverhalten. Allerdings gibt es auch qualitativ hochwertige Thermoplaste. Trotzdem kann die AGK - als spanender Bearbeiter - selbstverständlich diese Werkstoffe bearbeiten. AGK - Werkstoff "KU" Thermoplastische Kunststoffe mit hoher Verschleißfestigkeit und geringer Gleitreibung sind die Hochleistungskunststoffe, die unsere duroplastischen Werkstoffe ergänzen. So erhalten Sie bei uns: Polyvinylidenfluorid (PVDF), PolyetheretherKeton (PEEK), Polytetrafluorethylen (PTFE (Teflon)), Polyphenylensulfid (HPV PPS), Polyimid (PI), Polyetylen (PE), PA (Polyamid), PP (Polypropylen), POM (Polyoxymethylen, Polyacetal), und Metall -...

At TRADIUM, neodymium is available in the following forms for industrial use: - Neodymium metal - Neodymium oxide Your point of contact for neodymium is: Jan Giese Phone: +49 (0)69 50 50 250 - 237 We are looking forward to hearing from you!

Anti-Friction Plain Bearings, self-lubricating

Our calcium bolus Calcitop is a fast-acting calcium supplement designed to solve a calcium deficiency (hypocalcemia) around calving. This deficiency will cause a lower feed intake and milk production and could potentially lead to (subclinical) milk fever. Especially from the second calving and later cows are sensitive to it. You can read everything about milk fever on our blog.

Technical plastic : Polyethylene (Short : PE) Product name Polyethylene (PE or sub groups like PE-HD, PE-LD, PE-HMW, PE-UHMW, PE 300, PE 500, PE 1000 or RCH 1000 and many more) Delivery form Sheets, cuts, milled products, base profiles Specification Polyethylene - technical plastic Polyethylene ( Short: PE ) is a technical plastic that can be processed easil. It has a density of about 0,95g/cm³ and with that it's the second least weighing plastic of all technical plastics and just because of that it offers a very interesting price. The moisture absorbtion of PE is about 0,0 %. The material is really good against lyes and acids , has a self-lubricating effect and is easy to mill ( cut, milling, lathe, water jet cutting and welding ). Furthermore it is a great material for abrasive fraught parts in e.g. machine engineering ( PE UHMW ), as inlay for bulk containers or as a cutting boards in the food industry or households. We would like to advise you which kind of PE RG ist the... Product name:Polyethylene (PE or sub groups like PE-HD, PE-LD, PE-HMW, PE-UHMW, PE 300, PE 500, PE 1000 or RCH 10 Delivery form:Sheets, cuts, milled products, base profiles Colors:Standard nature , black, green , other colors possible Regenerate : Standard black and green Thickness:8 - 280 mm (Thickness > 280 mm possible with welding ) Dimensions:3.000 x 2.500 x 8 - 120 mm* 2.000 x 1.000 x 10 - 280 mm or cuts from these standards Surface:smooth or planed, * checker pate surface possible Minimum order quantity:1 Standard sheet Material:New material or Regenerat in PE HD an PE HMW Colors:Standard nature & black , other colors possible Regenerate : Standard black Thickness:1-30 mm Dimension:2.000 x 1.000 mm 3.000 x 1.500 mm Or cuts out of these standards Surface:smooth, structured, with a foil or Regenerate which could have some flaws Minimum order quantity:20 sheets

Wir bieten Ihnen eine große Auswahl an Technischen Kunststoffen und ermitteln für Sie den technisch und wirtschaftlich optimalen Kunststoff für Ihre Anforderungen.

Thermoforming Polyimide Film,Corona Resistance (CR) polyimide film,PI Film - Manufacturer of Polyimide Film in china. 1) HN Polyimide Film 2) FPC Polyimide Film 3) FEP(F46) Polyimide Film (FH/FHF) 4) Black Polyimide Film 5) ESD Polyimide Film 6) Aluminized Polyimide Film 7) Red,Green,Transparent Polyimide Film 8) Thermoforming Polyimide Film 9) Corona Resistance (CR) polyimide film 10) Thermal Conductive MT polyimide film Yancheng Tiandi Insulation Co.,Ltd Web: https://www.polyimide-pi.com/polyimide-film.htm Email: hsinsulation@aliyun.com hsinsulation@hotmail.com Tel :+86-139-61986280 Fax : +86-515-69011600

PPSU (Polyphenylsulfon) Food Grade, FDA, auch für industrielle Anwendungen wie Fugen und Armaturen, transparent, schöne Eigenfarbe PPSU Food Grade, FDA, auch für industrielle Anwendungen wie Fugen, Armaturen, transparent, schöne Eigenfarbe Seit 2016 importieren wir diese PPSU nach Europa - geeignet für Spritzguss oder ähnliche Prozesse. Erhältlich als Granult - auch PSU und PES.

Sodium Hydroxide Liquid (Caustıc Soda) Sodium Hydroxide Solid

Insulation foam for pipes or walls. Used in construction business. Available in different sizes or colours. Laminated foam products are available (aluminium laminated foam, film laminated foam, etc.)

Titandioxide der Cofermin Chemicals, Essen, Deutschland in diversen Qualitäten (Anatas und Rutil) Herkunft:Deutschland

PTFE Platte virginal ohne Füllstoffe 10,00 mm stark - natur weiß Maße 295 mm x 295 mm , roh gesägt mit Plustoleranz

Sheets and rods.

Diversidade de Plásticos Técnicos de alta qualidade.

SMS and SMMS Spunbond Nonwoven fabric for medical sector are also for hospital textiles for Sugical Mask Prodoction, Overalls Medical Dress. In addition, they are made in full and part reinforces Nonwoven fabric for application where more protection is required.

Monocalcium phosphate occurs as a white or slightly dull powder or granules. It does not have a distinct smell. It is soluble in water and does not ignite when exposed to flames. Calcium (Ca):13% Min Fluorine (F):0.18% max Arsenic (As):0.002% Max Plumbum (Pb):0.002% Max Moisture:4.00% Max

It is granulated, stabilized normally and in natural appearance. It is used for textile and paper impregnation and production of monofilaments at high processing rates, for the production of home appliances, medical devices, technical manufacturing input materials, rough textile, the electrical industry parts, food, wine and tobacco industries packages and so on. All the grades are REACH certified, in accordance with paragraph 3.1.6 of “European Pharmacopoeia” / with RoHS II and approved for contact with Foodstuffs.

Incassables et rigides, elles conviennent au calage, au capitonnage et à la séparation des objets les plus lourds et encombrants (équipements bureautiques, machines, pièces métalliques, œuvres d’art en pierre ou en bronze…) Antichocs, elles reprennent leur forme initiale même après plusieurs chocs et ne s’effritent pas, même au contact d’angles saillants.

PDM granül kauçuktan üretildiği için oldukça esnek bir maddedir. Bu nedenler her türlü şarta kolaylıkla ayak uydurabilir. Yazın güneşi ya da kışın soğuğu bu malzemeye hiçbir şekilde zarar veremez. Elastik olmasından dolayı darbelere karşı oldukça fazla dayanıklıdır. Elastik olması malzemenin her şekle girmesine de yardımcı olur. Yapısı gereği çok dayanıklı bir ürün olan EPDM granül, öyle hava şartlarına göre değişiklik göstermez. Her duruma dayanıklı olan bu malzemede esneme, genleşme, büzülme gibi olaylar asla yaşanmaz. Bu sayede yaz sıcağında ve kış soğuğunda kolaylıkla kullanılır. EPDM sonradan renklendirilen bir madde değildir. Boyama yöntemi kullanılmayan bu malzemede renk solması gibi bir durum asla yaşanmaz. Yıllarca renkleri bozulmadan kalabilir. Bu malzemede aklınıza gelebilecek her rengi kullanabilirsiniz. Geniş bir renk seçeneğine sahip olan EPDM granül size istediğiniz rengi seçme şansını verecektir.

Aluminum hydroxide, white solid, is a typical amphoteric hydroxide that is insoluble in water but soluble in acid or alkali. It can be transformed into alumina after heated in the air for dehydration, which is important for alumina production. Aluminum hydroxide is a widely used chemical product, and it is mainly used as plastic and polymer fillers, blanket flame retardant and binder, epoxy resin filler, toothpaste fillers, glass ingredients as well as paper color fillers and coatings. It can be also used to product sulfuric acid Aluminum, alum, aluminum fluoride and sodium aluminate, and to synthesize molecular sieve. The gel and drying gel of aluminum hydroxide can be used in medicine as antacids to neutralize gastric acid and protect ulcer surface for the treatment of gastric and duodenal ulcer disease and hyperacidity

Das Gummi NP- Granulat ist frei von kanzerogenen N- Nitrosaminen und Weichmachern.

Chemical appearance: The appearance of Sodium metabisulfite is either in the form of white crystals or as a powdered solid with a slight odor of sulfur. Inhalation could lead to toxic results and can cause serious damages to skin and tissue. Sodium metabisulfite is clearly soluble in water and forms a clear and colorless solution. Chemical application and strengths: The primary applications of Sodium metabisulfite are evident in the mining industry. It is used for controlling the depression of pyrites and sphalerite minerals. MBS is ideal for pH control for the froth flotation process, where it could control pyrite depression. Sodium Metabisulfite is also helpful in preventing flotation of sphalerite through copper activation with the availability of Tennantite/Covellite in the ore. In the case of pyrite flotation, the maximum iron/pyrite depression with the use of Sodium Metabisulfite is possible somewhere around the pH of 6. CAS Number:7681-57-4 HS Code:283210

für Extrusionsanwendungen in den Farben: natur weiß bunt schwarz für Spritzgussanwendungen: HDPE Mfi 3-5 Regranulat HDPE Mfi 4-7 Regranulat HDPE Mfi 6-8 Regranulat in bunt und schwarz

Silicon nitride is one of the hardest ceramics but also one of the most resistant. Si3N4 is mainly used in severe environments which combine extreme temperatures with abrasive and/or corrosive medium. Silicon nitride can be of different grades : sintered, hot pressed or reaction bonded. Selection of materials Microcertec offers two high-purity Si3N4 grades that are particularly suited for hostile environments : sintered silicon nitride hot pressed silicon nitride Both Si3N4 materials are mainly designed to be used in thermal-mechanical or corrosion-resistance applications because they show an outstanding behaviour to resist to wear, thermal shocks and corrosion (liquids and gases). Moreover, these pure Si3N4 grades offer a low thermal expansion. Properties Sintered silicon nitride and HP Si3N4 have the following properties : low density excellent thermal shock resistance excellent wear resistance excellent corrosion resistance (liquids and gas) low coefficient of thermal...

MFI (g/10 min (230°C/2.16 kg) -2,5- 3,5 Produktform: Granulat 2-5mm Verpackung: Sack 25 kg Preis:0,85/kg Nur 5t. Lager: 42555 Velbert Deutschland

LDPE-Regranulat aus Postproduktionsabfällen geeignet zur Herstellung auch sehr dünnen Blasfolien. MFI-Bereich von 0,5 bis 3,0 angepasst an die Kundenspezifikation. Das Rohmaterial ist richtig gefiltert, sehr sauber und homogen. Kann an andere Anwendungen angepasst werden, Herstellung von Gießfolie oder Spritzguss. Bestätigte Qualität für jede Charge des Produkts. Verpackung:1 oder 1,2 Mg Big Bag auf 1,2 x 1,2 Palette Voll-LKW-Ladung:24 000 kg Netto

Methyl paraben